Your Local Vermont
Concrete Grinding Contractor

---

Concrete Reflections

Concrete Reflections - 718-989-0251
Serving Vermont
www.ConcreteReflections.com
info@ConcreteReflections.com

All new and old concrete floors within a commercial facility that is scheduled for polishing, a painted surface, wax or epoxy coating or any special covering must be prepared properly by a grinding process in order to adhere correctly. If grinding does not take place or if it is not done correctly then the flooring that will be applied will not adhere correctly and will eventually fail.

Concrete Reflections Inc., a national leader in concrete polishing and grinding has been serving Vermont and the New England area since 2004 with high quality workmanship at competitive prices and will be happy to prep and grind any commercial facility over 1,000 feet. The reasons for prepping and grinding a floor is quite simple, if the facility is new, then the new concrete is too tight at the surface and if it is not prepared properly by grinding then the floor that will be installed will not adhere correctly. This is the same for old concrete. Old concrete is dirty and contains various imperfections. If the bare concrete is not prepared properly by a grinding process then the new floor applied will fail over time.

Depending on the sate of the concrete, preparation and grinding of a concrete floor is not overly complicated and can be achieved with just a few steps. A Concrete Reflections Inc. crew uses heavy grinders to open the concrete surface and clean it of all contaminants, which will leave it porous and ready for the selected floor covering. Each machine is equipped with diamond-impregnated disks that are attached to multiple spinning wheels under the machine. The rotation of these wheels on the concrete floor, grind the surface, removing imperfections and leveling the floor. The dust that is produced from the concrete extraction is contained by a shroud lining the outside of the machine's base and then vacuumed through hoses attached to the machine and a high-powered vacuum. The results are a fully grinded floor that has been prepared and ready for the floor covering of choice.